Clyde Steel

We supply coils from our own stock consisting of:

Hot Rolled Steel
Cold Rolled Steel
Galvanized Coated Steel
Electrogalvanized Coated Steel
AL-Zn Coated Steel

Association membership:

(Steel and Engineering Industries Federation of South Africa)

Slitting

Our "Free Loop Slitter" with shimless tooling, is able to slit coils from 0.4mm to 2.5mm thick, 1550mm wide using up to 25 ton coils max.

We are able to provide:

Good Edge Quality on all gauges
More uniform tension on slit strands
Better wound coils on recoiler
Close tolerances on slit widths

Blanking

Our "Cut To Length line" incorporates a "Swivel Share" which blanks material from 0.4mm to 1.6mm thick, 1300mm wide to lengths of 6000m using 12.5ton coils max.

We are able to provide:

Tight tolerance blanks
Tapered blanks in line
Produce scratch free blanks
Apply protective film to sheets
Combine slitting and cut to lenghth

Pressing

Our "Press Feeding Line" is able to press out formed blanks direct from a coil 0.4mm to 2.0mm thick, 1250mm wide with a maximum mass of 12.5 tons.

The capacity of our press can press much thicker gauges depending on the finished component and die.